diff --git a/88x2bu.conf b/88x2bu.conf
index c89b051..f2fd6d9 100644
--- a/88x2bu.conf
+++ b/88x2bu.conf
@@ -5,13 +5,14 @@
 # Edit the following line to change, add or delete options:
 options 88x2bu rtw_drv_log_level=0 rtw_led_ctrl=1 rtw_vht_enable=1 rtw_power_mgnt=1 rtw_beamform_cap=10 rtw_dfs_region_domain=0 rtw_switch_usb_mode=2
 #
-# After editing is complete, save this file and reboot to activate the changes.
+# After editing is complete, save this file (if using nano: Ctrl+X, Y, Enter)
+# and reboot to activate the changes.
 #
 # Documentation:
 #
 # -----
 #
-# Log level options: ( rtw_drv_log_level )
+# Log options: ( rtw_drv_log_level )
 #
 # 0 = NONE (default)
 # 1 = ALWAYS
@@ -24,11 +25,11 @@ options 88x2bu rtw_drv_log_level=0 rtw_led_ctrl=1 rtw_vht_enable=1 rtw_power_mgn
 # Note: You can save a log file that only includes RTW log entries by running
 # the following in a terminal:
 #
-# $ sudo ./save-log.sh
+# sudo ./save-log.sh
 #
 # -----
 #
-# LED control options: ( rtw_led_ctrl )
+# LED options: ( rtw_led_ctrl )
 #
 # 0 = Always off
 # 1 = Normal blink (default)
@@ -36,21 +37,20 @@ options 88x2bu rtw_drv_log_level=0 rtw_led_ctrl=1 rtw_vht_enable=1 rtw_power_mgn
 #
 # -----
 #
-# VHT enable options: ( rtw_vht_enable )
+# VHT options: ( rtw_vht_enable )
 #
 #  0 = Disable
 #  1 = Enable (default)
 #  2 = Force auto enable (use only for 5 GHz AP mode)
 #
 # Notes:
-# - Unless you know what you are doing, don't change the default.
 # - A non-default setting can degrade performance greatly in managed mode.
-# - For 5GHz AP mode, such as when you are using hostapd, setting this
-#   option to 2 will allow 80 MHz channel width.
+# - Option 2 allows 80 MHz channel width for 5GHz AP mode, such as when
+#   you are using hostapd.
 #
 # -----
 #
-# Power management options: ( rtw_power_mgnt )
+# Power options: ( rtw_power_mgnt )
 #
 # 0 = Disable power saving
 # 1 = Power saving on, minPS (default)
@@ -64,14 +64,14 @@ options 88x2bu rtw_drv_log_level=0 rtw_led_ctrl=1 rtw_vht_enable=1 rtw_power_mgn
 # 1 = SU Beamformer (recommended for AP mode)
 # 2 = SU Beamformee
 # 3 = SU Beamformer and SU Beamformee
-# 10= SU Beamformee and MU Beamformee (default)
+# 10= SU Beamformee and MU Beamformee (default) (recommended for managed mode)
 # 11= SU Beamformer and SU Beamformee and MU Beamformee
 #
 # Note: MU Beamformer not supported.
 #
 # -----
 #
-# DFS Channel Options ( rtw_dfs_region_domain )
+# DFS Options ( rtw_dfs_region_domain )
 #
 # 0 = NONE (default)
 # 1 = FCC
@@ -80,12 +80,12 @@ options 88x2bu rtw_drv_log_level=0 rtw_led_ctrl=1 rtw_vht_enable=1 rtw_power_mgn
 #
 # Note: Activates DFS channels in AP mode.
 # Note: DFS channels automatically work in managed mode.
-# Note: DFS channels in US: 52(58), 100(106), 116(122) and 132(138)
+# Note: DFS FCC 80 MHz channels: 52(58), 100(106), 116(122) and 132(138)
 # For more information: https://en.wikipedia.org/wiki/List_of_WLAN_channels
 #
 # -----
 #
-# USB mode options: ( rtw_switch_usb_mode )
+# USB options: ( rtw_switch_usb_mode )
 #
 # 0 = No switch
 # 1 = Switch from usb 2.0 to usb 3.0 (recommended for 5 GHz AP mode)