update docs and clean code

Makefile

@@ -11,13 +11,14 @@ EXTRA_CFLAGS += -Wno-unused-variable
 #EXTRA_CFLAGS += -Wno-unused-value
 #EXTRA_CFLAGS += -Wno-unused-label
 #EXTRA_CFLAGS += -Wno-unused-parameter
-EXTRA_CFLAGS += -Wno-unused-function
+#EXTRA_CFLAGS += -Wno-unused-function
 #EXTRA_CFLAGS += -Wno-unused
 #EXTRA_CFLAGS += -Wno-uninitialized
 #EXTRA_CFLAGS += -Wno-vla
 EXTRA_CFLAGS += -Wno-misleading-indentation
 EXTRA_CFLAGS += -Wno-implicit-fallthrough
 #EXTRA_CFLAGS += -Wno-return-type
+#EXTRA_CFLAGS += -Wno-discarded-qualifiers
 
 # Activates Concurrent Mode if uncommented
 #EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
@@ -94,11 +95,10 @@ CONFIG_RTW_CHPLAN = 0xFF
 CONFIG_RTW_ADAPTIVITY_EN = disable
 CONFIG_RTW_ADAPTIVITY_MODE = normal
 CONFIG_SIGNAL_SCALE_MAPPING = n
-# necessary for WPA3 support
 CONFIG_80211W = y
 CONFIG_REDUCE_TX_CPU_LOADING = n
 CONFIG_BR_EXT = y
-CONFIG_TDLS = y
+CONFIG_TDLS = n
 CONFIG_WIFI_MONITOR = y
 CONFIG_MCC_MODE = n
 CONFIG_APPEND_VENDOR_IE_ENABLE = n
@@ -127,7 +127,7 @@ CONFIG_RTW_DEBUG = y
 CONFIG_RTW_LOG_LEVEL = 1
 
 # enable /proc/net/rtlxxxx/ debug interfaces
-CONFIG_PROC_DEBUG = y
+CONFIG_PROC_DEBUG = n
 
 ######################## Wake On Lan ##########################
 CONFIG_WOWLAN = n
@@ -2516,6 +2516,13 @@ uninstall:
 	rm -f $(MODDESTDIR)$(MODULE_NAME).ko
 	/sbin/depmod -a ${KVER}
 
+sign:
+	@openssl req -new -x509 -newkey rsa:2048 -keyout MOK.priv -outform DER -out MOK.der -nodes -days 36500 -subj "/CN=Custom MOK/"
+	@mokutil --import MOK.der
+	@$(KSRC)/scripts/sign-file sha256 MOK.priv MOK.der 8821cu.ko
+
+sign-install: all sign install
+
 backup_rtlwifi:
 	@echo "Making backup rtlwifi drivers"
 ifneq (,$(wildcard $(STAGINGMODDIR)/rtl*))

core/rtw_debug.c

@@ -42,7 +42,7 @@ const char *rtw_log_level_str[] = {
 void dump_drv_version(void *sel)
 {
 	RTW_PRINT_SEL(sel, "%s %s\n", DRV_NAME, DRIVERVERSION);
-//	RTW_PRINT_SEL(sel, "build time: %s %s\n", __DATE__, __TIME__);
+// nrm	RTW_PRINT_SEL(sel, "build time: %s %s\n", __DATE__, __TIME__);
 }
 
 #ifdef CONFIG_PROC_DEBUG

core/rtw_mlme_ext.c

@@ -12246,7 +12246,7 @@ static void rtw_mlmeext_disconnect(_adapter *padapter)
 		self_action = MLME_STA_DISCONNECTED;
 	else if (MLME_IS_ADHOC(padapter) || MLME_IS_ADHOC_MASTER(padapter))
 		self_action = MLME_ADHOC_STOPPED;
-/* nrm */
+// nrm
 #ifdef CONFIG_WIFI_MONITOR
 	else if (MLME_IS_MONITOR(padapter))
 		self_action = MLME_ACTION_NONE;

core/rtw_pwrctrl.c

@@ -89,8 +89,7 @@ void _ips_enter(_adapter *padapter)
 
 	if (rf_off == pwrpriv->change_rfpwrstate) {
 		pwrpriv->bpower_saving = _TRUE;
-/* nrm */
+// nrm		RTW_PRINT("nolinked power save enter\n");
-//		RTW_PRINT("nolinked power save enter\n");
 
 		if (pwrpriv->ips_mode == IPS_LEVEL_2)
 			pwrpriv->bkeepfwalive = _TRUE;
@@ -143,8 +142,7 @@ int _ips_leave(_adapter *padapter)
 		pwrpriv->pwr_saving_time += rtw_get_passing_time_ms(pwrpriv->pwr_saving_start_time);
 #endif /* CONFIG_RTW_CFGVENDOR_LLSTATS */
 
-/* nrm */
+// nrm		RTW_PRINT("nolinked power save leave\n");
-//		RTW_PRINT("nolinked power save leave\n");
 
 		RTW_INFO("==> ips_leave.....LED(0x%08x)...\n", rtw_read32(padapter, 0x4c));
 		pwrpriv->bips_processing = _FALSE;

hal/hal_dm.c

@@ -1392,6 +1392,7 @@ void dump_sta_info(void *sel, struct sta_info *psta)
 			HDATA_RATE(curr_tx_rate), (curr_tx_sgi) ? "S" : "L");
 	RTW_PRINT_SEL(sel, "curr_tx_bw : %s\n", ch_width_str(ra_info->curr_tx_bw));
 	RTW_PRINT_SEL(sel, "curr_retry_ratio : %d\n", ra_info->curr_retry_ratio);
+// nrm
 	RTW_PRINT_SEL(sel, "ra_mask : 0x%016llx\n", ra_info->ramask);
 }
 

hal/hal_dm_acs.c

@@ -291,6 +291,7 @@ void rtw_acs_info_dump(void *sel, _adapter *adapter)
 
 	_RTW_PRINT_SEL(sel, "========== ACS (VER-%d) ==========\n", RTK_ACS_VERSION);
 	_RTW_PRINT_SEL(sel, "Best 24G Channel:%d\n", hal_data->acs.best_chan_24g);
+// nrm
 	_RTW_PRINT_SEL(sel, "Best 5G Channel:%d\n", hal_data->acs.best_chan_5g);
 
 	#ifdef CONFIG_RTW_ACS_DBG

hal/halmac/halmac_88xx/halmac_8822b/halmac_init_8822b.c

@@ -988,10 +988,9 @@ pre_init_system_cfg_8822b(struct halmac_adapter *adapter)
 	enable_bb = 0;
 	set_hw_value_88xx(adapter, HALMAC_HW_EN_BB_RF, &enable_bb);
 
-/* nrm */
 	if (HALMAC_REG_R8(REG_SYS_CFG1 + 2) & BIT(4)) {
 		PLTFM_MSG_ERR("[ERR]test mode!!\n");
-//		return HALMAC_RET_WLAN_MODE_FAIL;
+// nrm		return HALMAC_RET_WLAN_MODE_FAIL;
 	}
 
 	PLTFM_MSG_TRACE("[TRACE]%s <===\n", __func__);

hal/halmac/halmac_88xx/halmac_8822b/halmac_usb_8822b.c

@@ -87,8 +87,7 @@ mac_pwr_switch_usb_8822b(struct halmac_adapter *adapter,
 		HALMAC_REG_W8_CLR(REG_SYS_STATUS1 + 1, BIT(0));
 
 		if ((HALMAC_REG_R8(REG_SW_MDIO + 3) & BIT(0)) == BIT(0))
-/* nrm */
+// nrm			PLTFM_MSG_ALWAYS("[ALWAYS]shall R reg twice!!\n");
-//			PLTFM_MSG_ALWAYS("[ALWAYS]shall R reg twice!!\n");
 
 		adapter->halmac_state.mac_pwr = HALMAC_MAC_POWER_ON;
 	}

include/autoconf.h

@@ -42,7 +42,6 @@
 #endif
 
 #ifdef CONFIG_80211AC_VHT
-	/* nrm - activates beamforming */
 	#define CONFIG_BEAMFORMING
 #endif
 
@@ -178,7 +177,7 @@
 
 #define CONFIG_RTW_LED
 #ifdef CONFIG_RTW_LED
-//	#define CONFIG_RTW_SW_LED
+// nrm	#define CONFIG_RTW_SW_LED
 	#ifdef CONFIG_RTW_SW_LED
 		/* #define CONFIG_RTW_LED_HANDLED_BY_CMD_THREAD */
 	#endif
@@ -187,6 +186,7 @@
 #define USB_INTERFERENCE_ISSUE /* this should be checked in all usb interface */
 #define CONFIG_GLOBAL_UI_PID
 
+// nrm
 #define CONFIG_RTW_80211K
 
 /*#define CONFIG_ADAPTOR_INFO_CACHING_FILE */ /* now just applied on 8192cu only, should make it general... */

os_dep/linux/recv_linux.c

@@ -139,7 +139,6 @@ int rtw_os_alloc_recvframe(_adapter *padapter, union recv_frame *precvframe, u8
 
 		precvframe->u.hdr.pkt = rtw_skb_clone(pskb);
 		if (precvframe->u.hdr.pkt) {
-			RTW_INFO("%s: rtw_skb_clone success, RX throughput may be low!\n", __FUNCTION__);
 			precvframe->u.hdr.pkt->dev = padapter->pnetdev;
 			precvframe->u.hdr.rx_head = precvframe->u.hdr.rx_data = precvframe->u.hdr.rx_tail = pdata;
 			precvframe->u.hdr.rx_end =  pdata + alloc_sz;

remove-driver.sh

@@ -6,11 +6,15 @@
 #
 # To make this file executable:
 #
-# $ chmod +x edit-options.sh
+# $ chmod +x remove-driver.sh
 #
 # To execute this file:
 #
-# $ sudo ./edit-options.sh
+# $ sudo ./remove-driver.sh
+#
+# or
+#
+# $ sudo sh remove-driver.sh
 #
 # Copyright(c) 2023 Nick Morrow
 #

save-log.sh

@@ -8,7 +8,11 @@
 #
 # To execute this file:
 #
-# $ sudo ./edit-options.sh
+# $ sudo ./save-log.sh
+#
+# or
+#
+# $ sudo sh save-log.sh
 
 SCRIPT_NAME="save-log.sh"