various updates

FAQ.md

@@ -8,7 +8,7 @@ driver is installed but does not seem to be working. What is wrong?
 Answer: This question often comes up after installing the driver to a
 system that has Secure Boot on. To test if there is a Secure Boot related
 problem, turn secure boot off in the system BIOS and reboot.  If the driver
-works as expected after reboot, them the problem is likely related to
+works as expected after reboot, then the problem is likely related to
 Secure Boot.
 
 What will increase my chances of having a sucessessful installation on a
@@ -20,7 +20,7 @@ the easiest solution is likely to do a clean reinstallation with Secure Boot
 on.
 
 Ubuntu is used as the example but other distros should be similar to one
-degree or another. During the installation there will be a box on one of
+degree or another. During the installation there may be a box on one of
 installation pages that will appear if the installation program detects
 that Secure Boot is on. You will need to check the appropriate box and
 supply a password. You can use the same password that you use for the system
@@ -44,6 +44,44 @@ https://wiki.debian.org/SecureBoot
 There is work underway to add Secure Boot support for systems that do not
 have `dkms` available or if a manual installation is desired.
 
+If you are using a basic command line (non-dkms) installation, see the
+following section in the Installation Steps part of the README:
+
+If you use the `install-driver.sh` script and see the following message
+
+`SecureBoot enabled - read FAQ about SecureBoot`
+
+You need to read the following:
+
+The MOK managerment screen will appear during boot:
+
+`Shim UEFI Key Management"
+
+`Press any key...`
+
+Select "Enroll key"
+
+Select "Continue"
+
+Select "Yes"
+
+When promted, enter the password you entered earlier.
+
+If you enter the wrong password, your computer will not be bootable. In
+this case, use the BOOT menu from your BIOS to boot then as follows:
+
+```
+sudo mokutil --reset
+```
+
+Restart your computer and use the BOOT menu from BIOS to boot. In the MOK
+managerment screen, select `reset MOK list`. Then Reboot and retry the
+driver installation.
+
+Manual Installation Instructions
+
+It provides secure boot instructions.
+
 -----
 
 Question: Is WPA3 supported?

Makefile

@@ -2538,7 +2538,7 @@ sign:
 	@mokutil --import MOK.der
 	@$(KSRC)/scripts/sign-file sha256 MOK.priv MOK.der 88x2bu.ko
 
-sign-install: all sign install
+sign-install: sign install
 
 backup_rtlwifi:
 	@echo "Making backup rtlwifi drivers"
@@ -2595,4 +2595,5 @@ clean:
 	rm -fr Module.symvers ; rm -fr Module.markers ; rm -fr modules.order
 	rm -fr *.mod.c *.mod *.o .*.cmd *.ko *~
 	rm -fr .tmp_versions
+	rm -fr MOK.der MOK.priv
 endif

README.md

@@ -91,7 +91,7 @@ be provided via PR or message in Issues.
 
 - [SkiffOS](https://github.com/skiffos/skiffos/) for Odroid XU4 (ARM 32 bit) (kernel 6.0.7)
 
-- [Ubuntu](https://www.ubuntu.com) 22.04 (kernel 5.15) and 22.10 (kernel 5.19) (kernel 6.2)
+- [Ubuntu](https://www.ubuntu.com) 22.04 (kernel 5.15), 22.10 (kernel 5.19), 23.04 (kernel 6.2)
 
 - [Void Linux](https://voidlinux.org/) (kernel 5.18)
 
@@ -388,16 +388,18 @@ Note: If you elect to skip the reboot at the end of the installation
 script, the driver may not load immediately and the driver options will
 not be applied. Rebooting is strongly recommended.
 
-Note: Fedora users that have secure boot turned on should run the following to
+Note: Fedora users that have secure boot turned on may need to run the
-enroll the key:
+following to enroll the key:
 
 ```
 sudo mokutil --import /var/lib/dkms/mok.pub
 ```
 
-Manual build and installation instructions: The above installation steps
+### Manual Installation Instructions
-automate the installation process, however, if you want to or need to do a
+
-command line installation, use the following:
+Note: The above installation steps automate the installation process,
+however, if you want to or need to do a basic command line installation,
+use the following:
 
 ```
 make clean
@@ -407,6 +409,8 @@ make clean
 make
 ```
 
+If secure boot is off:
+
 ```
 sudo make install
 ```
@@ -415,6 +419,47 @@ sudo make install
 sudo reboot
 ```
 
+If secure boot is on:
+
+Note: Please read to the end of this section before coming back here to
+enter commands.
+
+```
+sudo make sign-install
+```
+
+You will be promted for a password, please remember the password as it
+will be used in some of the following steps.
+
+```
+sudo reboot
+```
+
+The MOK managerment screen will appear during boot:
+
+`Shim UEFI Key Management"
+
+`Press any key...`
+
+Select "Enroll key"
+
+Select "Continue"
+
+Select "Yes"
+
+When promted, enter the password you entered earlier.
+
+If you enter the wrong password, your computer will not be bootable. In
+this case, use the BOOT menu from your BIOS to boot then as follows:
+
+```
+sudo mokutil --reset
+```
+
+Restart your computer and use the BOOT menu from BIOS to boot. In the MOK
+managerment screen, select `reset MOK list`. Then Reboot and retry from
+the step `sudo make sign-install`.
+
 To remove the driver if installed by the manual installation instructions:
 
 ```

dkms-make.sh

@@ -9,7 +9,10 @@ SMEM=$(LANG=C free | awk '/Mem:/ { print $2 }')
 # sproc needs to be set here if dkms build is not initiated by install-driver.sh
 sproc=$(nproc)
 
-# avoid Out of Memory condition in low-RAM systems by limiting core usage
+# calculate number of cores to be used in order to avoid Out of Memory
+# condition in low-RAM systems by limiting core usage.
+# this section of code is also in the file install-driver.sh and that 
+# code should stay the same as this code.
 if [ "$sproc" -gt 1 ]; then
 	if [ "$SMEM" -lt 1400000 ]; then
 		sproc=2

install-driver.sh

@@ -141,6 +141,10 @@ echo ": ${SCRIPT_NAME} v${SCRIPT_VERSION}"
 # display architecture
 echo ": ${KARCH} (architecture)"
 
+# calculate number of cores to be used in order to avoid Out of Memory
+# condition in low-RAM systems by limiting core usage.
+# this section of code is also in the file dkms-make.sh and that 
+# code should stay the same as this code.
 SMEM=$(LANG=C free | awk '/Mem:/ { print $2 }')
 sproc=$(nproc)
 # avoid Out of Memory condition in low-RAM systems by limiting core usage
@@ -189,7 +193,6 @@ else
 	echo ": mokutil not installed"
 fi
 
-
 echo ": ---------------------------"
 echo
 
@@ -286,13 +289,21 @@ if ! command -v dkms >/dev/null 2>&1; then
 		exit $RESULT
 	fi
 
-# 	As shown in Makefile
+#	if secure boot is active, use sign-install
-# 	install:
+	if command -v mokutil >/dev/null 2>&1; then
-#		install -p -m 644 $(MODULE_NAME).ko  $(MODDESTDIR)
+		if mokutil --sb-state | grep -i  enabled >/dev/null 2>&1; then
-#		/sbin/depmod -a ${KVER}
+			echo ": SecureBoot enabled - read FAQ about SecureBoot"
-	make install
+			make sign-install
-	RESULT=$?
+			RESULT=$?
-
+		else
+			make install
+			RESULT=$?		
+		fi
+	else
+		make install
+		RESULT=$?
+	fi
+	
 	if [ "$RESULT" = "0" ]; then
         	make clean >/dev/null 2>&1
 		echo "The driver was installed successfully."