115 lines
2.6 KiB
Plaintext
115 lines
2.6 KiB
Plaintext
# /etc/modprobe.d/88x2bu.conf
|
|
#
|
|
# Purpose: Allow easy access to specific driver options.
|
|
#
|
|
# Edit the following line to change, add or delete options:
|
|
options 88x2bu rtw_drv_log_level=0 rtw_led_ctrl=1 rtw_vht_enable=1 rtw_power_mgnt=1 rtw_beamform_cap=0 rtw_dfs_region_domain=0 rtw_switch_usb_mode=2
|
|
#
|
|
# After editing is complete, save this file (if using nano: Ctrl+X, Y, Enter)
|
|
# and reboot to activate the changes.
|
|
#
|
|
# Documentation:
|
|
#
|
|
# -----
|
|
#
|
|
# Log options: ( rtw_drv_log_level )
|
|
#
|
|
# 0 = NONE (default)
|
|
# 1 = ALWAYS
|
|
# 2 = ERROR
|
|
# 3 = WARNING
|
|
# 4 = INFO
|
|
# 5 = DEBUG
|
|
# 6 = MAX
|
|
#
|
|
# Note: You can save a log file that only includes RTW log entries by running
|
|
# the following in a terminal:
|
|
#
|
|
# sudo ./save-log.sh
|
|
#
|
|
# Note: The name of the log file will be ```rtw.log```.
|
|
#
|
|
# -----
|
|
#
|
|
# LED options: ( rtw_led_ctrl )
|
|
#
|
|
# 0 = Always off
|
|
# 1 = Normal blink (default)
|
|
# 2 = Always on
|
|
#
|
|
# -----
|
|
#
|
|
# VHT options: ( rtw_vht_enable )
|
|
#
|
|
# 0 = Disable
|
|
# 1 = Enable (default)
|
|
# 2 = Force auto enable (use only for 5 GHz AP mode)
|
|
#
|
|
# Notes:
|
|
# - A non-default setting can degrade performance greatly in managed mode.
|
|
# - Option 2 allows 80 MHz channel width for 5GHz AP mode, such as when
|
|
# you are using hostapd.
|
|
#
|
|
# -----
|
|
#
|
|
# Power options: ( rtw_power_mgnt )
|
|
#
|
|
# 0 = Disable power saving
|
|
# 1 = Power saving on, minPS (default)
|
|
# 2 = Power saving on, maxPS (not recommended for AP mode)
|
|
#
|
|
# -----
|
|
#
|
|
# Beamforming options: ( rtw_beamform_cap )
|
|
#
|
|
# 0 = Disable (default) (recommended for AP mode)
|
|
# 1 = SU Beamformer
|
|
# 2 = SU Beamformee
|
|
# 3 = SU Beamformer and SU Beamformee
|
|
# 10= SU Beamformee and MU Beamformee
|
|
# 11= SU Beamformer and SU Beamformee and MU Beamformee
|
|
#
|
|
# Note: MU Beamformer not supported.
|
|
#
|
|
# -----
|
|
#
|
|
# DFS Options ( rtw_dfs_region_domain )
|
|
#
|
|
# 0 = NONE (default) (use this option for managed mode)
|
|
# 1 = FCC
|
|
# 2 = MKK
|
|
# 3 = ETSI
|
|
#
|
|
# Notes:
|
|
# - Activates DFS channels in AP mode.
|
|
# - DFS channels automatically work in managed mode.
|
|
# - DFS FCC 80 MHz channels for hostapd: 52(58), 100(106), 116(122) and 132(138)
|
|
# - For more information: https://en.wikipedia.org/wiki/List_of_WLAN_channels
|
|
#
|
|
# -----
|
|
#
|
|
# USB options: ( rtw_switch_usb_mode )
|
|
#
|
|
# 0 = No switch
|
|
# 1 = Switch from usb 2.0 to usb 3.0
|
|
# 2 = Switch from usb 3.0 to usb 2.0 (default)
|
|
#
|
|
# Note: This driver may need to stay in USB2 mode for AP mode operations
|
|
# on some platforms in order to avoid dropping offline. This issue has been
|
|
# observed on 32 bit Raspberry Pi OS.
|
|
#
|
|
#
|
|
# -----
|
|
#
|
|
# To see all options that are available:
|
|
#
|
|
# $ ls /sys/module/88x2bu/parameters/
|
|
#
|
|
# -----
|
|
#
|
|
# To see the values that are in use:
|
|
#
|
|
# $ grep [[:alnum:]] /sys/module/88x2bu/parameters/*
|
|
#
|
|
# -----
|